# Hammond XM2c MIDI drawbar module in a stand-alone mode

**URL:** <https://discourse.checkcheckonetwo.com/t/hammond-xm2c-midi-drawbar-module-in-a-stand-alone-mode/2768>\
**Category:** MIDI Programming\
**Created:** [May 5, 2021, 7:07pm UTC](https://discourse.checkcheckonetwo.com/t/hammond-xm2c-midi-drawbar-module-in-a-stand-alone-mode/2768 "2021-05-05T19:07:25Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![xgman](https://discourse.checkcheckonetwo.com/letter_avatar_proxy/v4/letter/x/58f4c7/32.png) [@xgman](https://discourse.checkcheckonetwo.com/u/xgman)\
**Post date:** [May 5, 2021, 7:07pm UTC](https://discourse.checkcheckonetwo.com/t/hammond-xm2c-midi-drawbar-module-in-a-stand-alone-mode/2768/1 "2021-05-05T19:07:26Z")

</div>

Has anyone tried to use Hammond Suzuki XM2c drawbar module as a stand alone unit?  
Some years ago I purchased the XM2c drawbar module as possible addition to my Hammond XK1 organ or other keyboards with a Hammond organ Software emulator.  
It turns out that the XM2c drawbar module can’t be used without the Host XM2 Midi Module.  
I managed to power it up and record midi sequences, but I realized that the current MIDI assignment is not compatible with any non-Hammond keyboards that I own .  
Example: All 9 drawbars in the Upper Drawbar Unit - just one CC#80.

I’m thinking of substituting the current board based on HD6417144 controller with my own Arduino board.
