# Stream Deck + Rotary Knobs for fader level adjust

**URL:** https://discourse.checkcheckonetwo.com/t/stream-deck-rotary-knobs-for-fader-level-adjust/4535
**Category:** Yamaha RCP Module
**Created:** [May 26, 2025, 1:45am UTC](https://discourse.checkcheckonetwo.com/t/stream-deck-rotary-knobs-for-fader-level-adjust/4535 "2025-05-26T01:45:19Z")
**Posts on this page:** 1
**Showing post:** 2

<div class="post-metadata">

### Author: ![Andy](https://discourse.checkcheckonetwo.com/letter_avatar_proxy/v4/letter/a/aeb1de/32.png) [@Andy](https://discourse.checkcheckonetwo.com/u/Andy)
#### Post date: [May 26, 2025, 3:23pm UTC](https://discourse.checkcheckonetwo.com/t/stream-deck-rotary-knobs-for-fader-level-adjust/4535/2 "2025-05-26T15:23:56Z")

</div>

Welcome, Spencer!

To use the rotaries, you would want to select the “Relative” checkbox in the action, then set the value to “-1” for a left turn of the rotary, and “+1” for the right turn of the rotary. (If you wanted the step to be higher or lower, you can change the 1 to another number - I go into an advanced method of changing these numbers by selecting a “course” and “fine” adjustment in the 2nd video)

I would highly recommend having a look at my videos that I created which show some of the basics of creating layouts using the RCP module. The process is the same for any of the mixers that the RCP module supports - TF/CL/QL/DM.

> [@RCP Videos](https://discourse.checkcheckonetwo.com/t/rcp-videos/3514):
>
> Some how-to videos on using Companion v3 and the RCP module. Just starting out on these, and I plan to do more, based on whatever people are asking about.

---

_[View the full topic](https://discourse.checkcheckonetwo.com/t/stream-deck-rotary-knobs-for-fader-level-adjust/4535)._