Yamaha Expanded Bank Options

Stream Deck & Companion Yamaha RCP Module
1

The PEQ Bank recall seems to work well with RCP on DM7 and Rivage.
(But the Companion module only has “Toggle” which doesn’t let users select between all 4 banks when in theater mode on the DM7 or Rivage)

I also noticed that there are no RCP logs when changing Banks on either Dynamics 1 or Dynamics 2.

In theatre mode, I would also like to be able to rename the PEQ and dynamics banks, but I don’t see RCP logs when changing the names of any of the banks on the Rivage.

These are the logs for recalling PEQ banks in this order: D,C,B,A (Recalling Bank A seems to also log every EQ setting)

System: Starting log. Only lines generated since opening the page are shown here

System: ** Log cleared **

26.07.07 21:35:48 Module: [2026-07-08T03:35:48.990Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/BankSelect 26 0 3 “3”’

26.07.07 21:35:50 Module: [2026-07-08T03:35:50.759Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/BankSelect 26 0 2 “2”’

26.07.07 21:35:51 Module: [2026-07-08T03:35:51.360Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/BankSelect 26 0 1 “1”’

26.07.07 21:35:51 Module: [2026-07-08T03:35:51.981Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/BankSelect 26 0 0 “0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.020Z] Received: ‘NOTIFY set MIXER:Current/InCh/HPF/Freq 26 0 800 “80.0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.021Z] Received: ‘NOTIFY set MIXER:Current/InCh/HPF/On 26 0 0 “0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.021Z] Received: ‘NOTIFY set MIXER:Current/InCh/HPF/Slope 26 0 18 “18”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.021Z] Received: ‘NOTIFY set MIXER:Current/InCh/LPF/Freq 26 0 160000 “16000.0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.021Z] Received: ‘NOTIFY set MIXER:Current/InCh/LPF/On 26 0 0 “0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.021Z] Received: ‘NOTIFY set MIXER:Current/InCh/LPF/Slope 26 0 12 “12”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.021Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/LowShelving/On 26 0 1 “1”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.021Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/HighShelving/On 26 0 1 “1”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.021Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Bypass 26 0 0 “0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.022Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Bypass 26 1 0 “0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.022Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Bypass 26 2 0 “0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.022Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Bypass 26 3 0 “0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.022Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Freq 26 0 1250 “125.0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.022Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Freq 26 1 3550 “355.0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.022Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Freq 26 2 35500 “3550.0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.022Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Freq 26 3 63000 “6300.0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.022Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Gain 26 0 0 “0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.023Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Gain 26 1 0 “0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.023Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Gain 26 2 0 “0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.023Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Gain 26 3 0 “0”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.023Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Q 26 0 1400 “1.400”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.023Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Q 26 1 1400 “1.400”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.023Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Q 26 2 1400 “1.400”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.023Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Q 26 3 1400 “1.400”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.023Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/On 26 0 1 “1”’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.023Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Typ’

26.07.07 21:35:52 Module: [2026-07-08T03:35:52.024Z] Received: ‘e 26 0 “LEGACY” “LEGACY”’

2

Interesting. I’ll have to look into this multiple peq bank mode on the DM7 and Rivage that have the Theater option. Thank you for reporting it.

3

On DM7, selecting Bank B and then back to Bank A gives these logs:
(so it seems like it logs all the PEQ parameters every time the bank changes)

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.250Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/BankSelect 2 0 1 “B”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.253Z] Received: ‘NOTIFY set MIXER:Current/InCh/HPF/On 2 0 0 “OFF”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.253Z] Received: ‘NOTIFY set MIXER:Current/InCh/HPF/Freq 2 0 800 “80.0”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.253Z] Received: ‘NOTIFY set MIXER:Current/InCh/HPF/Slope 2 0 12 “-12”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.253Z] Received: ‘NOTIFY set MIXER:Current/InCh/LPF/On 2 0 0 “OFF”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.253Z] Received: ‘NOTIFY set MIXER:Current/InCh/LPF/Freq 2 0 160000 “16.0k”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.253Z] Received: ‘NOTIFY set MIXER:Current/InCh/LPF/Slope 2 0 12 “-12”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.253Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/On 2 0 1 “ON”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.254Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Type 2 0 “PRECISE” “PRECISE”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.254Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Bypass 2 0 0 “OFF”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.254Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Bypass 2 1 0 “OFF”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.254Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Bypass 2 2 0 “OFF”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.254Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Bypass 2 3 0 “OFF”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.254Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Freq 2 0 1250 “125”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.255Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Freq 2 1 3550 “355”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.255Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Freq 2 2 35500 “3.55k”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.255Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Freq 2 3 63000 “6.30k”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.255Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Gain 2 0 0 “0.0”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.255Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Gain 2 1 0 “0.0”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.255Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Gain 2 2 0 “0.0”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.255Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Gain 2 3 0 “0.0”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.255Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Q 2 0 4000 "4.0 "’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.255Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Q 2 1 1400 "1.4 "’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.255Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Q 2 2 1400 "1.4 "’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.255Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Q 2 3 4000 "4.0 "’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.255Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/HighShelving/On 2 0 1 “ON”’

26.07.08 16:51:39 Module: [2026-07-08T22:51:39.256Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/LowShelving/On 2 0 1 “ON”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.067Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/BankSelect 2 0 0 “A”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.070Z] Received: ‘NOTIFY set MIXER:Current/InCh/HPF/On 2 0 0 “OFF”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.070Z] Received: ‘NOTIFY set MIXER:Current/InCh/HPF/Freq 2 0 1250 “125”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.070Z] Received: ‘NOTIFY set MIXER:Current/InCh/HPF/Slope 2 0 12 “-12”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.070Z] Received: ‘NOTIFY set MIXER:Current/InCh/LPF/On 2 0 0 “OFF”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.070Z] Received: ‘NOTIFY set MIXER:Current/InCh/LPF/Freq 2 0 160000 “16.0k”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.070Z] Received: ‘NOTIFY set MIXER:Current/InCh/LPF/Slope 2 0 12 “-12”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.070Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/On 2 0 1 “ON”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.070Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Type 2 0 “PRECISE” “PRECISE”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.070Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Bypass 2 0 0 “OFF”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.070Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Bypass 2 1 0 “OFF”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.071Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Bypass 2 2 0 “OFF”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.071Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Bypass 2 3 0 “OFF”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.071Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Freq 2 0 1250 “125”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.071Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Freq 2 1 3550 “355”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.071Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Freq 2 2 35500 “3.55k”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.072Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Freq 2 3 63000 “6.30k”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.072Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Gain 2 0 0 “0.0”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.072Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Gain 2 1 0 “0.0”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.073Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Gain 2 2 0 “0.0”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.073Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Gain 2 3 0 “0.0”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.073Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Q 2 0 4000 "4.0 "’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.073Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Q 2 1 1400 "1.4 "’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.073Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Q 2 2 1400 "1.4 "’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.073Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/Band/Q 2 3 4000 "4.0 "’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.073Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/HighShelving/On 2 0 1 “ON”’

26.07.08 16:51:40 Module: [2026-07-08T22:51:40.073Z] Received: ‘NOTIFY set MIXER:Current/InCh/PEQ/LowShelving/On 2 0 1 “ON”’

Changing Banks for dynamics 1 or dynamics 2 doesn’t show any logs.

But when “Actor” is engaged for that channel enabling the 4 different banks of PEQ/Dynamics, I don’t see any logs when I change banks on PEQ or either of the dynamics.

(both of these were done on the same console which has both theatre and broadcast licenses activated)

4

Try version 3.6.2 that I just uploaded and see if that allows for bank switching.
https://discourse.checkcheckonetwo.com/t/latest-v4-modules/3460

5

Oh awesome, we’ve been investigating if this is possible as switching a bunch of channels to another bank is a tedious process for more than a few channels. From my investigations, I’m not sure the console exposes a proper way to do this via RCP (editor can do it, but that’s obviously not rcp). I’ll have to give this module version a try sometime this week.

6

@taylorglad did you have a chance to try this yet?

7

On the Rivage it works with 0,1,2,3 for banks A,B,C,D (or numbers with decimals are rounded down, and anything over 3 recalls bank D)

So I can test it on the DM7 later this week.

1 Like